This prime rib roast recipe is built for a calm, stress-free Christmas dinner. For a foolproof prime rib, dry brine a bone-in rib roast with kosher salt for 1 to 3 days. Roast it at 250°F (120°C) until the center reads 120°F (49°C) for medium-rare. Rest it for 30 minutes. Then blast it at 500°F (260°C) for 8 to 10 minutes to build the crust. Additionally, this “reverse sear” gives you pink meat from edge to edge, with no gray band. A 3-bone roast (7 to 8 lb) needs about 4 to 5 hours in the oven. Always cook to temperature, not time.
Prime rib makes Christmas dinner feel like an event. Furthermore, it’s also the most expensive thing many of us cook all year. That’s why searches for “prime rib roast recipe” jump about 300% in December. Nobody wants to ruin a 0 roast. The reverse sear takes most of the stress away. The low oven gives you a wide window to hit your target. And the final sear can happen while everyone sits down.

Quick Facts
- Roast: bone-in standing rib roast, 3 bones (7 to 8 lb / 3.2 to 3.6 kg)
- Serves: 6 to 8
- Dry brine: 1 to 3 days in the fridge (at least overnight)
- Oven time: about 4 to 5 hours at 250°F, plus a 10-minute sear
- Must-have tool: a probe or instant-read thermometer
Prime Rib vs Ribeye vs Standing Rib Roast
They’re all the same cut. Additionally, a “standing rib roast” is the bone-in rib section (ribs 6 to 12) roasted standing on its bones. “Prime rib” is the name it usually goes by, even though most of what we buy is graded USDA Choice, not Prime. The USDA beef grades are based mostly on marbling: Prime has the most, Choice is a little leaner and very good, and Select is the leanest. Cut a rib roast into steaks and you get ribeyes.

How Big a Prime Rib Do You Need?
| Guests | Bones | Approx. weight (bone-in) | Oven time at 250°F (to 120°F) |
|---|---|---|---|
| 4 | 2 | 4 to 5 lb | About 2 1/2 to 3 1/2 hours |
| 6 to 8 | 3 | 7 to 8 lb | About 4 to 5 hours |
| 8 to 10 | 4 | 9 to 10 lb | About 5 to 6 hours |
| 12+ | 6 to 7 | 14 to 18 lb | About 6 to 7 hours |
The rule of thumb is one bone for every two people, or about 1 pound bone-in per person if you want leftovers. Oven times vary with your oven and the shape of the roast. Furthermore, use them as a guide and leave an extra hour of buffer. The roast can rest, covered, for up to an hour without harm.
Pull Temperatures for Prime Rib
| Doneness | Pull from the low oven | Final temp after sear and rest | Looks like |
|---|---|---|---|
| Rare | 115°F (46°C) | 120°F (49°C) | Deep red, cool center |
| Medium-rare | 120°F (49°C) | 125 to 130°F (52 to 54°C) | Rosy pink, warm and juicy |
| Medium | 128°F (53°C) | 135°F (57°C) | Light pink |
| USDA safe minimum | 138 to 140°F (59 to 60°C) | 145°F (63°C) + 3-min rest | Pale pink to tan |
The USDA recommends 145°F with a 3-minute rest for whole cuts of beef. On top of that, many cooks and steakhouses serve prime rib rarer than that. Choose what’s right for your guests, especially for pregnant women, young children and older adults.

Ingredients
Here is everything you need for this prime rib roast recipe.
- 1 bone-in standing rib roast, 3 bones (7 to 8 lb)
- Kosher salt: about 1 teaspoon Diamond Crystal (or 1/2 teaspoon Morton) per pound
- 2 tablespoons coarsely ground black pepper
- 4 tablespoons (56 g) unsalted butter, softened
- 6 garlic cloves, finely grated
- 2 tablespoons chopped fresh rosemary
- 1 tablespoon chopped fresh thyme
- 1 tablespoon Dijon mustard (optional)

How to Cook a Prime Rib Roast (Reverse Sear)
- Dry brine (1 to 3 days ahead). Pat the roast dry and season it all over with the salt. Set it on a rack over a tray and refrigerate uncovered. The salt seasons the meat deeply, and the dry surface browns much better.
- Bring to room temperature. Next, take it out 2 hours before roasting. Heat the oven to 250°F (120°C).
- Make the herb butter. Then mash the butter with the garlic, rosemary, thyme, mustard and pepper. Rub it over the fat cap and sides.
- Roast low. After that, set the roast bone-side down in a roasting pan (the bones are a natural rack). Insert a probe thermometer into the center of the thickest part, not touching bone. Roast until it reads 120°F for medium-rare.
- Rest. Now move it to a board, tent loosely with foil and rest 30 to 60 minutes. Turn the oven up to 500°F (260°C).
- Sear. Next, return the roast to the hot oven for 8 to 10 minutes, until deeply browned and crackling.
- Carve and serve. Because it already rested, you can slice right away.

Reverse Sear vs Classic 500°F “Closed Oven” Method
You’ve probably seen the viral method. Roast at 500°F for 5 minutes per pound, turn the oven off and don’t open the door for 2 hours. In addition, it can work. But it depends on how well your oven holds heat. Newer ovens with fans or auto shut-off often undercook it. You also can’t check the temperature without letting heat out. The reverse sear is more forgiving. The low oven cooks slowly and evenly, and you can check the thermometer anytime.
How to Carve Prime Rib
- After that, stand the roast on its bones and run a long knife along the curve of the bones to cut them away in one piece.
- Now turn the boneless roast fat-side up.
- Next, slice across the grain into 1/2 to 1-inch slices.
- Then cut between the bones and serve them too. They’re everyone’s favorite part to chew on.
Want easier carving? Ask the butcher to cut the bones off and tie them back on. Besides, you still get the flavor of a bone-in roast. When it’s time to carve, just snip the strings. Small details like this make a big difference in this prime rib roast recipe.

What to Serve With Prime Rib
Classic sides are horseradish cream, Yorkshire pudding, roasted potatoes and a green vegetable. And you’ll want au jus. Low ovens leave very few drippings, so I make my prime rib au jus without drippings a day ahead. For starters, a bowl of Southern oyster stew keeps the tradition going, and my easy Christmas recipes cover desserts and drinks.

Leftover Prime Rib
Refrigerate leftovers within 2 hours. What’s more, they keep 3 to 4 days. Slice the meat cold, then warm it gently in a little au jus in a covered pan over low heat, so it stays pink. Leftover prime rib makes great French dip sandwiches, steak hash and beef fried rice.


Reverse Sear Prime Rib Roast
Ingredients
- 1 bone-in standing rib roast, 3 bones 7 to 8 lb / 3.2 to 3.6 kg
- 7 to 8 tsp Diamond Crystal kosher salt about 1 tsp per lb (half as much Morton)
- 2 tbsp coarsely ground black pepper
- 4 tbsp unsalted butter, softened 56 g
- 6 garlic cloves, finely grated
- 2 tbsp fresh rosemary, chopped
- 1 tbsp fresh thyme, chopped
- 1 tbsp Dijon mustard optional
Equipment
- Roasting pan
- Probe or instant-read thermometer
- Wire rack and tray for dry brining
- Long carving knife
Method
- 1 to 3 days ahead, pat the roast dry, salt it all over and refrigerate uncovered on a rack.
- Take the roast out 2 hours before cooking. Heat the oven to 250°F (120°C).
- Mash the butter with garlic, rosemary, thyme, mustard and pepper; rub over the roast.
- Set bone-side down in a roasting pan, insert a probe in the thickest part and roast until it reads 120°F (49°C) for medium-rare, about 4 to 5 hours.
- Rest, loosely tented, 30 to 60 minutes. Heat the oven to 500°F (260°C).
- Sear in the hot oven 8 to 10 minutes until deeply browned. Cut off the bones, slice across the grain and serve.
Nutrition
Notes
Private Notes
Tried this recipe?
Let us know how it was!Prime Rib Roast Recipe FAQ
Here are quick answers to the questions people ask most about this prime rib roast recipe.
How long do you cook prime rib per pound?
At 250°F, plan on about 30 to 40 minutes per pound to reach 120°F. But the shape of the roast and your oven matter more than the weight. Always cook to internal temperature.
What temperature should I take prime rib out?
For medium-rare, pull it at 120°F (49°C). After the rest and the sear, it ends at about 125 to 130°F.
Should prime rib be covered when roasting?
No. Roast it uncovered so the outside dries and browns. Tent it loosely with foil only while it rests.
Bone-in or boneless prime rib?
Bone-in has a bit more flavor, and the bones protect the meat so it cooks more evenly. Boneless is easier to carve and cooks a little faster.
Do you need to sear prime rib first?
Not with this method. Searing at the end gives a better crust and no gray band inside the roast. Searing first is the old-fashioned way.
How much prime rib per person?
Buy about 1 pound bone-in, or 1/2 to 3/4 pound boneless, per person. One rib bone feeds about two people.
One Last Tip
Test your thermometer before the big day. Put it in boiling water. At sea level, it should read 212°F (100°C). Likewise, a thermometer that’s off by just 5 degrees is the top reason a perfect roast comes out overcooked.
I hope this prime rib roast recipe earns a spot at your table. If you make it, leave a rating and tell me how it went!
Making prime rib this Christmas? Tell me in the comments how you like it cooked, and leave a star rating on the recipe card. Pin it now so your holiday plan is all in one place.