Peanut Brittle is a thin, glassy type of candy that’s created when you cook sugar and corn syrup until the temperature reaches 300° F; add in peanuts; and finally add in butter and baking soda. When these ingredients are combined they create a light, crunchy sheet. The old-fashioned peanut brittle recipe takes about 25 minutes to complete, requires 8 pantry items and produces approximately 1 lb. of candy that will snap cleanly rather than stick to your teeth.
My grandmother would make peanut brittle each December in her old dented pot. The entire home would then smell of toasted peanuts and caramel. Peanut brittle has become popular once again; during last winter, YouTube search trends for “peanut brittle recipe” increased approximately 90%. Consider making a batch of peanut brittle to place in your holiday gift tins or store the recipe for National Peanut Brittle Day on January 26th.

Quick Facts
- Total time: 25 minutes, plus 30 minutes to cool
- Makes: about 1 pound (450 g), 16 servings
- Difficulty: easy-medium (watch the temperature)
- Key tool: candy thermometer (a no-thermometer test is below)
- Make ahead: yes, up to 3 weeks in an airtight tin
What Is Peanut Brittle?
Brittle is a hard sugar candy with nuts set inside. Peanut brittle is the American classic, especially in the South, where peanuts grow. It shows up in holiday tins, at church bazaars and in old candy shops.
The consistency of this snack needs to be light and crunchy (crispy), but also very airy, not firm or hard like a lollipop. The reason for that airy texture is due to an unexpected ingredient — baking soda.
Why This Peanut Brittle Recipe Works
Two things make or break brittle.
The 300°F mark. Sugar has to reach the hard-crack stage, about 300°F to 310°F (149°C to 154°C). Below that, brittle turns chewy and sticky. That’s the classic rule in candy making.
Baking soda at the end. When you stir in baking soda, it reacts with the hot sugar and releases tiny bubbles. The candy foams up and sets full of air pockets. That’s what makes old-fashioned brittle easy to bite.
Corn syrup is also important. It prevents the formation of rough, crystalline structures in the sugar, which allows the brittle to remain clear and shiny.
Peanut Brittle Ingredients and Swaps
- 1 cup (200 g) granulated sugar
- 1/2 cup (120 ml) light corn syrup
- 1/4 cup (60 ml) water
- 1 cup (145 g) raw Spanish peanuts or raw peanuts
- 2 tablespoons (28 g) butter, softened
- 1 teaspoon vanilla extract
- 1 teaspoon baking soda
- 1/4 teaspoon fine salt, plus flaky salt for topping (optional)
Toasted raw peanuts in the hot sugar. If you don’t have raw peanuts, but do have toasted peanuts, that’s fine; simply put those on at a slightly different time. Other than that, here are some other options for making this recipe.
| Ingredient | Swap | What changes |
|---|---|---|
| Raw peanuts | Roasted salted peanuts | Add at 280°F, not 240°F; saltier, less toasty |
| Peanuts | Pecans | Buttery, softer nut; see my pecan brittle |
| Peanuts | Cashews or almonds | Same method; almonds are crunchier |
| Light corn syrup | Golden syrup | Slightly darker, more caramel flavor |
| Butter | Coconut oil | Dairy-free; very mild coconut taste |
Equipment
You don’t need anything fancy for this peanut brittle recipe. However, a heavy pan really matters, because thin pans scorch sugar fast.
- A heavy 2 to 3-quart saucepan.
- A candy thermometer that clips to the pan.
- A large rimmed baking sheet, buttered or lined with a silicone mat.
- A heatproof spatula or wooden spoon.
How to Make Peanut Brittle, Step by Step
Measure out the butter, vanilla, baking soda, and salt ahead of time. The final step takes place within seconds.
- Prep the pan. Butter a large rimmed baking sheet well, or line it with a silicone mat.
- Cook the syrup. In the saucepan, stir the sugar, corn syrup and water over medium heat until the sugar dissolves. Clip on the thermometer and let it boil, without stirring, to 240°F (116°C).
- Add the peanuts. Stir in the raw peanuts. Keep stirring gently and cook until the syrup is light amber and reads 300°F (149°C), about 8 to 10 minutes. The peanuts will smell toasty.
- Finish fast. Take the pan off the heat. Stir in the butter, vanilla and salt, then the baking soda. It will foam up and turn pale golden.
- Pour and spread. Pour onto the baking sheet right away. Spread it thin with the spatula, working fast before it sets.
- Stretch it (optional). After 1 to 2 minutes, wearing clean oven mitts or buttered gloves, pull the edges outward to make it even thinner.
- Cool and break. Sprinkle with flaky salt if you like. Let it cool 30 minutes until hard, then break it into pieces.
Hot sugar burns badly, so keep kids and pets away from the stove during steps 3 to 5. Everything else about this candy is very forgiving.
Sugar Temperature Guide for Brittle
If your brittle went wrong before, this chart usually explains why. In fact, every good peanut brittle recipe comes down to these few degrees.
| Temperature | Sugar stage | Result if you stop here |
|---|---|---|
| 240°F (116°C) | Soft ball | Time to add raw peanuts |
| 270°F to 290°F (132°C to 143°C) | Soft crack | Chewy, sticks to teeth |
| 300°F to 310°F (149°C to 154°C) | Hard crack | Perfect brittle, clean snap |
| Above 320°F (160°C) | Dark caramel | Bitter, burnt taste |

No Thermometer? Use the Cold Water Test
No problem, because this peanut brittle recipe works without one too. First, drop a little syrup into a glass of very cold water. If the syrup reaches the hard crack stage then it will form brittle threads which will break easily if you try to bend them. If the threads do not break easily or if they seem to be sticky, continue to cook the syrup and test again in 30 seconds. Also keep an eye on the color of your syrup; you want a light amber color such as honey.
Microwave Peanut Brittle (Quick Version)
Short on time? Many families make it in the microwave. In a large glass bowl, microwave 1 cup sugar and 1/2 cup corn syrup for 4 minutes on high. Stir in 1 cup peanuts and microwave 3 to 4 minutes more, until light amber. Stir in the butter and vanilla, microwave 1 minute, then stir in the baking soda and pour. Microwaves vary a lot, so watch the color closely, and use oven mitts; the bowl gets extremely hot.
What’s New: Brittle Flavors to Try This Season
Brittle is getting creative again. Once you know the basic peanut brittle recipe, you can change it in lots of ways. For example, these are the twists I keep seeing:
- Spicy brittle: 1/2 tsp cayenne or chili flakes stirred in with the butter.
- Chocolate-dipped brittle: dip half of each piece in melted dark chocolate.
- Bacon brittle: add 1/2 cup crumbled crisp bacon with the baking soda.
- Everything brittle: mixed nuts, pumpkin seeds and a pinch of flaky salt.
Common Peanut Brittle Mistakes
It’s Chewy or Sticky
It did not reach 300 degrees Fahrenheit, or the reading on your thermometer is too low. Place your thermometer in a pot of boiling water. If you are located at sea level, the reading will be 212 degrees Fahrenheit (100 degrees Celsius).
It’s Too Thick and Hard
It was either poured after being mixed too long, or was not stretched quickly enough. Stretch the soda mixture while still warm, after pouring.
It Turned Grainy
Sugar crystals were created (usually by stirring prior to boiling) or by sugar that had been left on the sides of the pan. Wash down the sides of the pan with a wet pastry brush.
It Got Sticky After a Day
Humidity. Brittle pulls moisture from the air around it. So, store it in an airtight container as soon as it cools. Also, try to avoid making it on very humid or rainy days.

Serving and Gift Ideas
Pack broken pieces in tins or cellophane bags with a twist tie. It’s perfect next to soft cookies and fudge on a holiday tray. Love brittle? Try my buttery pecan brittle next. For a full candy table, see my easy Christmas candy recipes.
How to Store Peanut Brittle
Because sugar candy hates moisture, storage makes a big difference with any peanut brittle recipe. Keep it in an airtight container at cool room temperature, with parchment between layers. The FoodSafety.gov charts cover general food storage if you need them.
- Room temperature: up to 3 weeks, airtight.
- Fridge: not recommended; condensation makes it sticky.
- Freezer: up to 3 months, very well sealed. Thaw in the container before opening.

Old-Fashioned Peanut Brittle
Ingredients
- 1 cup granulated sugar 200 g
- 1/2 cup light corn syrup 120 ml
- 1/4 cup water 60 ml
- 1 cup raw Spanish peanuts 145 g
- 2 tbsp butter, softened 28 g
- 1 tsp vanilla extract
- 1 tsp baking soda
- 1/4 tsp fine salt
- flaky sea salt optional
Method
- Butter a large rimmed baking sheet well or line it with a silicone mat. Measure the butter, vanilla, salt and baking soda into a small bowl.
- In a heavy saucepan over medium heat, stir the sugar, corn syrup and water until the sugar dissolves. Clip on a candy thermometer and boil without stirring to 240°F (116°C).
- Stir in the peanuts and keep stirring gently until the syrup is light amber and reaches 300°F (149°C), about 8 to 10 minutes.
- Take off the heat. Quickly stir in the butter, vanilla and salt, then the baking soda; it will foam up.
- Pour onto the baking sheet right away and spread thin with a heatproof spatula.
- Sprinkle with flaky salt if you like. Cool 30 minutes until hard, then break into pieces and store airtight.
Notes
Private Notes
Tried this recipe?
Let us know how it was!Peanut Brittle FAQ
Why is my peanut brittle chewy?
The reason for your chewy brittle is that the sugar did not get hot enough to reach the hard-crack stage, which occurs between 300°F and 310°F (149°C and 154°C). To ensure that your brittle gets to this temperature, use a candy thermometer and test its accuracy in boiling water before you begin. Additionally, high humidity levels can cause brittle to become soft even after it has set.
What does baking soda do in peanut brittle?
When the baking soda is added to the heated sugar, it will release carbon dioxide as a byproduct. This will cause the candy to become “foamy” and to have many small air spaces inside, causing the candy to be lighter, lighter-colored, and more easily bitten.
Can I make peanut brittle without corn syrup?
Yes. Instead of using glucose, you can use either golden syrup or honey, or you can make your own by heating up some granulated sugar in a pot with a little bit of water and a splash of lemon juice. If you are not using an invert syrup, the sugar will likely crystallize faster than usual, so try to avoid stirring it until it begins to boil.
Raw or roasted peanuts for brittle?
Traditional raw peanuts can be toasted by the heat of the syrup. You can also use roasted peanuts. Roasted peanuts should be added at a lower temperature (about 280 degrees Fahrenheit) after the syrup has cooled slightly so as not to cause them to burn.
How long does homemade peanut brittle last?
Up to 3 weeks in an airtight container at cool room temperature, or 3 months in the freezer. Keep it away from humidity.
Can I double the recipe?
You should create two individual batches instead. Double batches will take longer to achieve 300 degrees Fahrenheit and may set up too quickly for you to be able to evenly distribute the candy.
One Last Tip
Warm your baking sheet in a low oven for 5 minutes before pouring. As a result, the brittle stays fluid a little longer, so you can spread it nice and thin. It’s the small trick that makes this peanut brittle recipe feel easy.
Make a batch this weekend and fill a tin for someone you love. Then let me know in the comments if you went classic or spicy. A quick star rating on the recipe card helps other candy makers find it, and pinning it keeps it handy for holiday gift season. More ideas are waiting in my easy Christmas recipes.